Video demultiplexer, Video Separator - 2-Channel
The Model 497-2CF Video Demultiplexer, or Video Channel Separator, doubles the transmission capacity of a conventional video channel by separating two NTSC or PAL video signals out of one multiplexed video signal. Install the Video Demultiplexer at the receive end of a transmission channel to demultiplex video signals from the Video Multiplexer Model 496-2CF installed at the transmit-end of the channel. The multiplexed signal can also be recorded using conventional equipment and then played back for demultiplexing through 497-2CF Demultiplexer. Video input to the Video Signal Demultiplexer from analog tape or line-lock cameras must be time base corrected.
Pictures from two security cameras can be combined into one signal with our Video Demultiplexer, aleviating the need for pulling a second video cable or employing a second RF radio channel.
Playback two video signals from one multiplexed tape, DVD, or other device, with our Video Demultiplexer.
Video Demultiplexer, Video Separator |
NTSC or PAL Color (specify when ordering)
720H x 480V 15FPS NTSC resolution for each signal
720H x 240V 30FPS NTSC resolution optional for each signal
720H x 580V 12.5FPS PAL resolution for each signal
Aluminum Chassis, Optionally Rack-Mountable
120 VAC or 240 VAC Power Input